Apcon Automation India Private Limited

1.1 General Specification Display n 3½ digit liquid crystal display (LCD) with a maximum reading of 2000 counts. Polarity n Automatic, positive implied, negative polarity indication. Overrange n (OL) or (-OL) is displayed. Zero n Automatic. Low battery n “ ” is displayed when the battery indication voltage drops below the operating level. Measurement n 3 times per second, nominal. rate Operating n 0°C to 50°C at < 70% relative humidity. Environment Storage n -20°C to 60°C, 0 to 80% R.H. with battery Temperature removed from meter. Accuracy n Stated accuracy at 270 C ± 50 C, <75% relative humidity. Power n Two 1.5V ‘AAA’ Size Battery Battery life n 200 hours typical Dimensions n 185 x 65 x 28mm (approx.) Weight n 170gms including battery (approx.) Accessories n Pair of test leads x 1, Instruction manual x 1, 1.5V batterys (installed) x 2, Carring Case x 1, (K type thermocouple upto 2600C for 27T-AUTO only) x 1 Maximum Jaw n 25mm Opening

Models : DWM72 X 144533-TRMS, DWM72 X 144534 - TRMS, DVM72 144533 - TRMS, DVM72 X 144534 - TRMS, DVAM72 X 144533 - TRMS, DVAM72 X 144534 -TRMS, DPF72 X 14433 - TRMS, DPF72 X 14434 -TRMSFeatures :

• TRMS Measurement
• 1" / 25.4 mm Digit Height Display
• 5 Digits 99999 Counts (Max.) Super Bright Display
• 3 Phase 3 Wire / 3 Phase 4 Wire System
• RS485 Port, 5 kV Isolated with Modbus RTU Protocol (Optional)
• Power Master Software (Optional)
• CE Compliance with EN61010-1, EN61326-1
• Stable & Accurate
• SMPS Power Supply
• " -VE" is Displayed to Indicate Export of Power
• Auto Indication of K & M for Kilo & Mega Respectively

Models : MFM-96S, SPVR-96S, MFM-DIN RAILFeatures :

• 10 Paramters, 48 Values on 16 Pages  (MFM-96S)
• 10 Parameters, 50 Values on 34 Pages (SPVR-96S & MFM-DIN RAIL)
• TRMS Measurement
• 3 Phase 3 Wire / 3 Phase 4 Wire (User Selectable)
• CTR, PTR, Inst. Address, Password & Energy Reset (Programmable)
• Energy Import - Export (4 Quadrant Operation)
• POWER MASTER Software (Optional)
• RS485 Port, 5KV Isolated with MODBUS RTU Protocol (Optional)
• CE Compliance as per EN61010- 1, EN61326- 1
• Inbuilt Memory to Store CTR, PTR, Inst. Address and Password
• Auto / Manual Scroll Display (Programmable)
• Energy Retention
• Energy Reset Programmable Parameters (Password Protected)

 Ordering InformationModel,Input Voltage,Input Current,Input Frequency,System 3P3E4W / 3P2E3W,CTR/PTR (if any),Auxiliary Supply and RD485 MODBUS Communication Port (Optional)

 
3½ Digit 2000 Count 1000A AC Manual Ranging Digital Clampmeter with Data Hold, Insulation Test, Resistance and Audible Continuity functions

Models : PG08TFeatures :

• Three Pin Socket & Plug Suitable for Indian Socket
• Large LCD Display with Backlight
• Memory Retention (KWh, MIN, CU, CU/KWh, CO2)
• Counts CO2 generated by Electrical Equipment (0.555kg CO2 is generated by using 1 KWh Energy)
• Timer & Relay Function for Power ON / OFF the Load
• TRMS V & mA for Sine Wave

 Measures

• Power (W)
• Power Factor (PF)
• Carbon Emission (CO2 in Kg)
• Total Used Time (MIN)
• Money (CU)
• Tariff (CU/KWh)
• Timer (DHH:MM)
• Frequency (Hz)
• Energy (KWh)
• TRMS Current (mA)
• TRMS Voltage (V)

ApplicationsTeaching, Demonstration & Testing of Electrical Energy Consumption of Household / Office Appliances like Refrigerator, Washing Machine, Microwave Oven, LED Lights etc. It can be used in Houses, Offices, Shops, Schools, Laboratories etc.

Models : CMT, CMT-TRMSFeatures :MECO AC Current Transducers measure AC Current and converts it to an industry standard output signal which is directly proportional to the measured input. These Transducers provide an output which is load independent and isolated from the input. The output can be connected to Controllers, Data-Loggers, PLC's, Analog / Digital Indicators, Recorders for display, analysis or control. They are ideal for SCADA, Energy Management, Telemetering for Remote, Local as well as Central Monitoring Systems. TypeDIN SeriesStandardsIEC 688 / EN 60688, EN 61010-1, EN 61326-1, IS12784 (Part-1)1989AC Input0-5A (Direct),0 - 1A (Direct),CTR/5A, CTR/1ADC OutputCurrent (mA): 0-1, 0-5, 0-10,2-10, 0-20, 4-20mA
Voltage (V) : 0-1V, 0-5V, 1-5V, 0-10V, 2-10VAccuracyStandard : ± 0.5% of Span
AuxiliarySMPS - HV : 85-265V AC / DC
SMPS - LV : 19-90V AC / DC
Self powered Available. Refer PDFIsolationComplete (Input / Output / Auxiliary / Case)Dielectric Strength2.5kV at 50 Hz for 1 min.(Standard)
4kV (Optional), across
Casing - Input/Output/Auxiliary
Input - Output
Input - Auxiliary
Output - Auxiliary

Models : 603 JUNIORFeatures :

• 3½ Digits
• 2000 Counts
• Manual Ranging
• DC Voltage upto 1000V
• AC Voltage upto 750V
• DC Current upto 10A
• AC Current upto 10A
• Resistance upto 20MΩ
• Diode Test
• hFE Test (Transistor Test)
• Continuity Test (LED, Buzzer & EF Strength)
• NCV (LED, Buzzer & EF Strength)
• LCD with Backlight
• Data Hold
• Auto Power Off
• Holster with Magnet
• Torch Light
• Test Lead Gripper
• Low Battery Indication

Models : EM09 (1A, 5A & 20A)Features :

• Measures V, A, PF, Hz, KW, KVA, KVAr, Kwh, KVAh & KVArh
• TRMS Measurement
• Can be used for Continuous Monitoring
• Auto / Manual Scroll Display (User Selectable)
• State of Art Microcontroller Design
• Portable, Handy, Plug-n-Play and Easy-to-use
• LCD Display with Backlight
• RS-485 5KV Isolated Port (Optional) with MODBUS RTU Protocol (Optional)
• POWER MASTER Software for MIS Reports (Optional)

 Applications

• Appliances Testing (AC, Refrigerator, Washing Machine, Air Cooler, Microwave Oven etc.)
• LED Light Testing
• Can be given to field technicians in their tool kit
• At the point of sale to demonstrate energy efficiency of your product over competition
• Can be used by R & D Dept in Designing Energy Efficient Products
• Study of Energy Efficiency of Electrical Equipment
• Product Quality Testing
• Energy Audit and Plant Maintenance
• Building Management Systems
• Power Management

Meco Infrared Thermometer for body temperature measurements. Made in india product with one year warranty.

Models : FDM963ASD, SMP9635SD, SMP14445D, SMP14445SD, FDM1444SAD & FDM1444SBD Ordering InformationModel, (Voltmeter / Ammeter) : Input Range, PTR / CTR (if any), Scale Display, Auxillary Supply and Accuracy Class (Frequency Meter) : Input Frequency Range, Input Voltage, PTR (if any), Auxillary Supply and Accuracy Class

Models : 450B+TRMSFeatures :

• 4½ Digits
• 19999 Counts
• TRMS
• Auto / Manual Ranging
• DC Voltage upto 1000.0V
• AC Voltage upto 750.0V
• DC Current upto 10.000A
• AC Current upto 10.000A
• Resistance upto 199.99MΩ
• Capacitance upto 9.999mF
• Frequency upto 9.999MHz
• Duty Cycle 1% ~ 99%
• Diode Test
• Audible Continuity
• Data Hold
• NCV
• MIN / MAX
• Δ ZERO / REL
• LCD with Backlight
• Auto Power Off
• Low Battery Indication

Models : MR65EDM, MR100EDM, CR65EDM, CR100EDM DescriptionClear Transparent Acrylic Rectangular Type Moving Coil MeterStandardsIS-1248, IEC-51, IEC-1010, BS-89, DIN 43700-43718Movement TypeMoving Coil with Central Magnetic Core, Spring Mounted Jewel Bearing Suspension with Rectifier Circuit for ACAccuracy

• ±2.5% of Full Scale for MR65EDM, CR65EDM
• ±1.5% of Full Scale for MR100EDM,CR100EDM

RangeDC Range

• Current (µA) : 0 - 100µA to 0 - 1000µA
• Current (mA) : 0 - 1mA to 0 - 1000mA
• Current (A ) : 0 - 1A to 0 - 30A 
• Voltage (mV) : 0 - 50mV to 0 - 100mV
• Voltage (V) : 0 - 1V to 0 - 1000V
• Galvanometer : 30 - 0 - 30G or 50 - 0 - 50G with 2µA / Div or 20µA / Div
• AC Range
• Current (mA) : 0 - 1mA to 0 - 1000mA
• Current (A) : 0 - 1A to 0 - 5A
• Voltage (V) : 0 - 10V to 0 - 750V

 Models : DC : ME70, AC, CE70 Accuracy± 2.5% of Full ScaleCaseClear transparent acrylic caseRanges & DetailsSimilar to models MR60 and CR60, Current Range max. 1.5 A Models : DC : MR135, AC : CR135 Accuracy

• ± 1.0% of Full Scale for MR135
• ± 1.5% of Full Scale for CR135

CaseBlack bakelite case, glass frontRanges & DetailsSimilar to models MR120 and CR120

Models : SPVR-96UE, SPVR-96UMT, MFM-96UE, MFM-96UMT, MFM-144X192UE, MFM-144X192UMTFeatures :

• TRMS Measurments
• 12 Parameters, 68 Values on 44 Pages (SPVR-96)
• 3 Group of 4 digit LCD with Backlight & Annunciations (SPVR-96)
• 12 Parameters, 68 Values on 22 Pages (MFM)
• 4 Rows of 4 Digit Super Bright Red LED Display (MFM)
• 3 Phase 4 Wire
• Programmable CTR, PTR & Instr. Address, Password & MD Period
• Energy Import - Export (4 Quadrant Operation)
• IP54 (For Meter Front)
• POWER MASTER Software (Optional)
• RS 485 Port, 5kV Isolated with MODBUS RTU Protocol (Optional)
• CE Compliance with EN61010-1, EN61326-1
• Inbuilt memory to store CTR, PTR, Instrument Address, Password & MD Period
• Auto Scroll (5 Sec.) / Manual Scroll Display 
• Built in 20 Energy Meters of 8 Digit Resoulation
• Energy Retention & Password Protected Energy Reset Facility
• #Additional features for SPVR-96UMT & SPVR-96UMT and MFM-144x192UMT
• Max. Demand for KW & KVA with User Selectable Demand Interval 5-30 min.
• THD for Voltage & Current
• Password for Protection of Programmable Parameters

 ApplicationsThese MFM's are ideal for Power Distribution Sector, PLC/SCADA,Power& Energy Management,Telemetering for Remote,QC Testing, Energy Audit Local as well as Central Monitoring SystemsOrdering InformationModel,Input Voltage,Input Current,Input Frequency,System 3P3E4W / 3P2E3W,CTR/PTR (if any),Auxiliary Supply and RD485 MODBUS Communication Port (Optional)

Models : MFM-96AFFeatures :

• TRMS Measurement
• 23 Parameters on 46 Pages
• 4 Rows of 4 Digit Super Bright RED LED Display
• 3 Phase 3 Wire /  3 Phase 4 Wire System (User Selectable)
• Programmable CTR, PTR, Instrument Address, Password and MD Period
• Energy Import - Export (4 Quadrant Operation)
• IP54 (For Meter Front)
• POWER MASTER Software (Optional)
• RS485 Port, 5KV Isolated with MODBUS RTU Protocol (Optional)
• CE Compliance with EN61010- 1, EN61326- 1
• Inbuilt Memory to Store CTR, PTR, Instrument Address, Password and MD period
• Auto Scroll (5 sec.) / Manual Scroll Display
• Built in 20 Energy Meters of 8 Digit Resolution
• Energy Retention and Password Protected Energy Reset Facility
• Max. Demand for KW or KVA with user Selectable Demand Interval 5-30 Minutes
• THD for Voltage and Current
• Password for Protection of Programmable Parameters
• RUN Hours, ON Hours
• Phase Angle and Phasor Angle Measurement
• Display Previous Energies
• Set Date and Time
• Measurement of Min. and Max. Voltage and Current Values

 Ordering InformationModel,Input Voltage,Input Current,Input Frequency and RS485 MODBUS Communication (Optional)

Models : SQ72 SQ96 Range

• Current (A) : 0 - 1A to 0 - 100A (Direct), Through CT/1A or /5A for Higher Currents
• Voltage (V) : 0 - 50V to 0 - 750V (Direct), Through PT for Higher Voltages

Size72x72mm, 96x96mmDescriptionMoving Iron Meter of 90° Deflection with Interchangeable Scale FacilityMovement TypeMoving Iron Spring Mounted Jewel Bearing SuspensionStandardsIS-1248, IEC-51, IEC-1010, BS-89, DIN 43700-43718Accuracy±1.5% of Full ScaleOrdering InformationModel, Input Range, CTR / PTR, Scale

Models : VMT, VMT-TRMSFeatures :MECO AC Voltage Transducer measures AC Voltage and converts it to an industry standard output signal which is directly proportional to the measured input. These Transducers provide an output which is load independent and isolated from the input. The output can be connected to Controllers, Data-Loggers, PLC's, Analog / Digital Indicators, Recorders for display, analysis or control. They are ideal for SCADA, Energy Management, Telemetering for Remote, Local as well as Central Monitoring Systems. TypeDIN SeriesStandardsIEC 688 / EN 60688, EN 61010-1, EN 61326-1, IS12784 (Part-1)1989AC Input0–63.5, 0-110V, 0-230V, 0-300V, 0-440V, 0-500VDC OutputCurrent (mA): 0-1, 0-5, 0-10,2-10, 0-20, 4-20mA
Voltage (V) : 0-1V, 0-5V, 1-5V, 0-10V, 2-10VAccuracyStandard : ± 0.5% of Span
AuxiliarySMPS - HV : 85-265V AC / DC
SMPS - LV : 19-90V AC / DC
Self powered Available. Refer PDFIsolationComplete (Input / Output / Auxiliary / Case)Dielectric Strength2.5kV at 50 Hz for 1 min.(Standard)
4kV (Optional), across
Casing - Input/Output/Auxiliary
Input - Output
Input - Auxiliary
Output - Auxiliary

Models : PG09 - 20A , PG09 - 5A, PG09 - 1AFeatures :

• Three Pin Socket and Plug Suitable for Indian Socket
• Large Dual Row LCD Display with Backlight and Annunciators
• Memory Retention (KWh, EUT)
• Simple, Easy and Accurate
• Continuous Measurements
• Counts CO2 generated by Electrical Equiptment (0.555kg CO2 is generated by using 1 KWh Energy)

 Measures

• TRMS Voltage (V)
• Frequency (Hz)
• TRMS Current (A)
• Power Factor (PF)
• Apparent Power (KVA)
• Reactive Power (KVAr)
• Active Power (KW)
• Energy Consumption (KWh)
• Energy Usage Time (EUT)
• Carbon Emission (CO2 in kg)

Applications

• Teaching
• Demonstration & Testing of Electrical Energy Consumption of Household / Office Appliances.
• It can be used in Houses, Offices, Shops, Schools, Laboratories etc.

Models : PFTFeatures :MECO AC Power Factor Transducers measure the power Factor in 1 Phase and 3 Phase electrical systems. The resulting output signal is directly proportional to the system power factor. These Transducers provide an output which is load independent and isolated from the input. The output can be connected to Controllers, Data-Loggers, PLC's Analog/Digital Indicators, Recorders for display, analysis or control. They are ideal for SCADA, Energy Management, Telemetering for Remote, Local as well as Central Monitoring System. TypeDIN SeriesStandardsIEC 688 / EN 60688, EN 61010-1, EN 61326-1, IS12784 (Part-1) 1989AC Input

• Voltage : 63.5 / 110 / 230 / 440V (any one only)
• Current : 1A / 5A (any one only)
• Frequency : 50 / 60 Hz (any one only)
• P.F.Range : 0.5 (Lag) - 1.0 - 0.5 (Lead) / 0.8 (Lag) - 1.0 - 0.2 (Lead)

DC Output

• Current : 0-1, 0-5, 0-10, 2-10, 0-20, 4-20mA
• Voltage : 0-1, 0-5, 1-5, 0-10, 2-10V

Accuracy

• Standard : ± 0.5% of Span

Auxiliary

• 110/230V AC ± 20%
• 24/48/110/220V DC ± 20%
• Self powered Available. Refer PDF

IsolationComplete (Input / Output / Auxiliary / Case)Dielectric Strength

• Strength 2.5kV at 50Hz for 1 min. (Standard)
• 4kV(Optional), across
• Casing - Input / Output / Auxiliary
• Input - Output
• Input - Auxiliary
• Output - Auxiliary

Models : FTFeatures :MECO Frequency Transducer measures Power Frequency over a specified Frequency Range and converts it to an industry standard output signal which is directly proportional to the measured input. These Transducers provide an output which is load independent and isolated from the input. The output can be connected to Controllers, Data-Loggers, PLC's, Analog / Digital Indicators, Recorders for display, analysis or control. They are ideal for SCADA, Energy Management, Telemetering for Remote, Local as well as Central Monitoring Systems. TypeDIN SeriesStandardsIEC 688 / EN 60688, EN 61010-1, EN 61326-1, IS12784 (Part-1) 1989AC InputFrequency : 45-55, 45-65, 55-65 Hz
Voltage : 63.5 / 110 / 230 / 440V (any one only)DC OutputCurrent : 0-1, 0-5, 0-10, 2-10, 0-20, 4-20mA
Voltage : 0-1, 0-5, 1-5, 0-10, 2-10VAccuracyStandard : ± 0.5% of SpanAuxiliary110/230V AC ± 20%
24/48/110/220V DC ± 20%
Self powered Available. Refer PDFIsolationComplete (Input / Output / Auxiliary / Case)Dielectric StrengthStrength 2.5kV at 50Hz for 1 min. (Standard)
4kV(Optional), across
Casing - Input / Output / Auxiliary
Input - Output
Input - Auxiliary
Output - Auxiliary

Models : MQ72, M72, MQ96, M96, ML72, ML96, ML110, ML144 DescriptionMoving Coil Meter of 90° or 240° Deflection with Fixed / Interchangeable Scale FacilityMovement TypeMoving Coil with Central Magnetic Core,
Spring Mounted Jewel Bearing SuspensionRange

• Current µA : 100µA to 600µA
• Current mA : 1mA to 600mA
• Current A : 1A to 50A (Direct), Through External Shunt for Higher Currents
• Voltage mV : 50mV to 600mV
• Voltage V : 1V to 1000V

StandardsIS-1248, IEC-51, IEC-1010, BS-89, DIN 43700-43718Accuracy

• ±1.5% of Full Scale for all except ML72
• ±2.5% of Full scale for ML72

Size72x72mm, 96x96mm, 110x110mm, 144x144mmOrdering InformationModel, Input Range, Scale

Models : MR60, MR65, MR100, MR120, CR60, CR65, CR100, CR120 DescriptionClear Transparent Acrylic Rectangular Type Moving Coil MeterMovement TypeMoving Coil with Central Magnetic Core, Spring Mounted Jewel Bearing Suspension with Rectifier Circuit for ACAccuracy

• ±1% of Full Scale for MR120
• ±1.5% of Full Scale for MR100, CR100, CR120
• ±2.5% of Full Scale for MR60, MR65, CR60, CR65

StandardsIS-1248, IEC-51, IEC-1010, BS-89, DIN 43700-43718Size60x60mm, 81x81mm, 100x80mm, 120x100mmRangeDC Range

• Current (µA) : 100µA to 750µA
• Current (mA) : 1mA to 750mA
• Current (A ) : 1A to 50A, 0-5A to 0-5000 A/75mV (for MR60 model direct 10A DC only - Above 10A use with external shunt)
• Voltage (mV) : 50mV to 750mV
• Voltage (V) : 1V to 1000V
• AC Range
• Current (A) : 1A or 5A (From 100mA to 5A AC, use with eternal CT box, supplied with the instrument)
• Voltage (V) : 10V to 1000V

Ordering InformationModel, Input Range, Scale